Fuse Tools, Pullers & Accessories
We sell an assortment of circuit protection accessories that suit our products including terminals, cable seals, crimping tools, fuse activated microswitches, fuse pullers, fuse testers and terminal tools.
These tools can be used to remove a variety of fuses from a fuse holder. Some can also be used to insert the fuse into the holder.
These tools can be used to remove a variety of fuses from a fuse holder and also test if a fuse is blown without removing the fuse from its holder.
These brackets are designed for surface mounting a range of our power disitribution units
An assortment of pre-terminated cables, jumpers and cable connectors.
An assortment of terminals designed for use in various holders and power distribution units.
An assortment of cavity and cable seals designed for use in various holders and power distribution units.
Crimp tools will crimp a wide range of terminals we sell. The terminal removal tool can be used to extract terminals from a unit.
An assortment of power connectors.
Accessories to suit our Din Rail mounted terminal blocks & fuse carriers.
These links can be used in place of a fuse for a circuit that no longer requires fuse protection.
These indicators can be mounted to specialised fuses. When the fuse blows the indicator pin will pop-out to trigger a microswitch.
These microswitches can be mounted directly onto specialised fuses. When the fuse blows, the microswitch will be triggered.
These caps can be fitted onto a variety of cartridge fuses. This allows the fuse to be soldered to a printed circuit board.
These extension caps allow you to use the new shorter DIN medium voltage fuses in the older holders which were designed for longer fuses.
An assortment of holder accessories designed for use with MTA products.